Ender IO: Pressure Conduits

Ender IO: Pressure Conduits

⚠️ NOTICE: This mod has been merged into Ender IO More Conduits! Future updates and new features will only be provided in the merged mod. Please download the new mod instead!

(Unofficial Ender IO Add-on / PneumaticCraft Integration)

Please scroll down for the Chinese Description. / 中文介绍请向下滑动查看。

🇬🇧 English Description

Core Features

• PneumaticCraft Integration: Adds Basic, Reinforced, and Advanced Pressure Conduits to transfer compressed air.
• Zero Volume & Thermodynamic Balancing: Perfectly sealed with zero internal volume. Air transfer is dynamically calculated by pressure differences, eliminating pressurization delays and ghost vacuums.
• Overpressure Explosions: Conduits will realistically explode if the connected machine's pressure exceeds their maximum threshold (can be disabled in config).
• Full Ender IO Integration: Coexists with other conduits in a single block space. Fully supports 16 color channels, Redstone control, and Facades.

📜 License & Modpack Policy

• Copyright (c) Saku_rain - ALL RIGHTS RESERVED
• Modpack Policy: You are completely free to include this mod in your modpacks via official platforms.

🇨🇳 中文介绍

⚠️ 重要提示：本模组已被正式合并至 Ender IO More Conduits (末影接口：更多导管) 模组中！ 未来所有的更新与新功能都将仅在新模组中进行，请前往下载新模组！

模组核心特性

• 气动工艺联动: 新增基础、强化与高级气压导管，支持原位平滑升级。
• 零体积与热力学平衡: 绝对密封且不占体积，底层严格按照压差与物理体积动态计算平衡，彻底消除庞大管网带来的充气延迟与气压震荡。
• 超压防爆机制: 若相连机器气压超过导管承压极限，导管将发生定向爆炸（可在配置中关闭）。
• 深度融入 EIO 体系: 可与其他科技管线在同方块内共存。完美支持 16 色频道隔离、红石控制与导管伪装板。

📜 版权声明与整合包政策

• 版权所有 (c) Saku_rain - 保留所有权利 (ALL RIGHTS RESERVED)
• 整合包政策： 只要通过合规的官方平台发布，非常欢迎将本模组加入到您的整合包中。

Ender IO: Pressure Conduits

(Unofficial Ender IO Add-on / PneumaticCraft Integration)

Please scroll down for the Chinese Description. / 中文介绍请向下滑动查看。

🇬🇧 English Description

🛑 Requirements & Compatibility

• Loader: NeoForge (1.21.1)
• Dependencies: Ender IO, PneumaticCraft: Repressurized. (Please use the latest versions available).
• Optional Dependency: Jade (Highly recommended. Enables HUD info for conduit specs).
• Safe to Install: This mod can be safely added to existing worlds without corrupting your saves.

💎 Core Features

1. Three Tiers of Pressure Conduits

• Basic Pressure Conduit: Transfers 1,000 mL per operation, 7.0 bar max pressure limit.
• Reinforced Pressure Conduit: Transfers 3,000 mL per operation, 25.0 bar max pressure limit.
• Advanced Pressure Conduit: Transfers 6,000 mL per operation, 25.0 bar max pressure limit.
• Supports smooth, in-place upgrading by simply right-clicking a lower-tier conduit with a higher-tier one.

2. Ender Space Technology (Zero Volume)

• Unlike native pneumatic tubes, these conduits boast zero internal volume. They act as instant, lossless transmission brokers and are perfectly sealed, eliminating the massive pressurization delays typical of large pipe networks.

3. Thermodynamic Balancing

• Air transfer relies on a dynamic fluid algorithm strictly calculated by pressure differences and the volume of connecting containers. It effectively prevents pressure sloshing, over-pressurizing small machines, and ghost vacuums.

4. Overpressure Explosions

• If the pressure of a connected machine exceeds the conduit's maximum threshold, the specific conduit will realistically explode and be destroyed (This feature can be toggled off in the config file).

5. Full Ender IO Integration

• Shared Block Space: Can coexist with other types of Ender IO conduits (e.g., Power, Fluid, Item) within a single block space.
• Seamlessly supports 16 IO color channels for separated networks within the same block space.
• Fully responsive Redstone control modes for dynamic logistics management.
• 100% compatible with Conduit Facades.

6. Jade HUD Support

• Aiming at a conduit bundle will immediately display its detailed specs via Jade, including the Single Transfer Volume, Transfer Per Second, Network Tick Rate, and the highlighted Max Pressure limit.

📜 License & Modpack Policy

• Copyright (c) Saku_rain - ALL RIGHTS RESERVED
• Modpack Policy: You are completely free and warmly welcome to include this mod in your modpacks, provided they are hosted on official platforms (like CurseForge/Modrinth).

🇨🇳 中文介绍

🛑 前置要求与兼容性说明

• 运行环境: 1.21.1 (NeoForge)
• 必要前置: 末影接口 (Ender IO), 气动工艺 (PneumaticCraft: Repressurized)。
• 可选前置: Jade（强烈推荐，安装后可开启 HUD 信息显示）。
• 安全安装: 本模组可随时无缝加入现有的存档中，不会损坏存档数据。

💎 模组核心特性

1. 阶梯式的气压导管与平滑升级

• 基础气压导管: 1000 mL/次 传输量，承压极限 7.0 bar。
• 强化气压导管: 3000 mL/次 传输量，承压极限 25.0 bar。
• 高级气压导管: 6000 mL/次 传输量，承压极限 25.0 bar。
• 支持手持高级导管直接右键低阶导管进行原位替换升级。

2. 末影空间技术（闭环密封与零体积）

• 导管网络内部不占用任何体积。能够实现瞬时、无损且绝对密封的气压传导，彻底消除原版庞大管网带来的充气延迟。

3. 动态热力学压差平衡

• 底层传输逻辑严格按照两端端点容器的气压差与物理体积动态计算实际平衡量，有效防止两端气压反复震荡与幽灵负气压问题。

4. 超压防爆机制

• 如果相连机器内部的气压超过了当前气压导管的承压极限，导管将发生定向爆炸并被销毁（该爆破特性可在配置文件中关闭）。

5. 深度融入 EIO 本土体系

• 同方块空间共存: 完美继承 EIO 核心机制，可与 EIO 内部其他类型导管（如能量、流体、物品、红石等）在同一个方块空间内共存绑定。
• 独立频道隔离: 完美支持 16 色独立的输入/提取频道隔离。
• 红石自动化: 支持原生红石控制模式（激活/禁用/忽略），由玩家自动化掌控抽气时机。
• 完美兼容导管伪装板遮挡。

6. Jade 完美兼容

• 当准星对准导管束时，HUD 会直观呈呈现气压导管的“单次传输量”、“单秒传输吞吐量”、“传输频率”以及标红的“承压极限”。

📜 版权声明与整合包政策

• 版权所有 (c) Saku_rain - 保留所有权利 (ALL RIGHTS RESERVED)
• 整合包政策： 只要通过合规的官方平台（如 CurseForge 或 Modrinth）发布，非常欢迎各位作者将本模组加入到你们的整合包中。