Nordale Signals

Nordale signals mod contains post and signals for nordale featuring the following:

Posts

• Wooden
• Lattice
• Tubular Steel
• all with rule 55 exemption plate

in Upper quadrant form

• Home Signal
• Distant Signal
• Call on Signal
• Loop signal
• Shunt signal

in lower quadrant form

• Home Signal
• Distant Signal
• Shunt Signal

in addition there is a 2 aspect colour light, and a feather aswell as a points motor that can be controlled by the 

to build a signal place posts down then put signal on the front of post

click signal with a control cable to bind it then put the control cable in a controller box, which will change the aspect of the signal as you apply or unapply redstone to the block.

Signals Mod for Nordale containing several signals used. uploaded here to be available for anyone. intended for use with the Immersive Railroading mod. but not mandatory.

the following is in the mod: posts:

• Wooden post (with backplate available)
• Lattice Post (with backplate available)
• Rail Post (with backplate available)
• Tubular Steel Post
• Lattice Gantry (with both wooden and lattice post compatability) signals:
• Upper Quadrant Home
• Lower Quadrant Home
• Upper Quadrant Distant
• Lower Quadrant Distant
• Shunt Disk
• SLJR Lower Quadrant Ground Shunt
• LNWR Lower Quadrant Shunt
• Upper Quadrant reduced Size Signal
• Upper Quadrant Calling on Arm
• Upper Quadrant Ringed signal
• Upper Quadrant Goods Loop Signal
• Colour Light Shunt Signal
• 2 Aspect Colour Light Signal
• Colour Light Feather in addition the following other bits are available:
• Points Motor
• Points lever
• Whistle Post

To construct a signal:

1. build the post up to the desired height
2. place controller box in signal box, with redstone on/of control (e.g. lever on controller box)
3. place signal on the front of the post (exception note: put colour light ontop of the post)
4. right click signal with signal cable
5. place signal cable in controller box
6. operate signal by powering controller box with the redstone.