OpenAutomation

The original module. Requires OpenComputers to exist, in order to function.
We have one feature still that's in the OC module. The Power Out-Converter. This block converts OC energy, to RF, sending it out to wherever you wish.
There is also a feature from the lasers in the OC module. The Computer Data Laser
It has one method:
component.laser.sendDataLaser(sides., message)
When received it sends a signal with the signature:
"laser_message", address_of_component_received_on, message

It can be sent into any component in the network /except/ the actual computer block.

While playing with Tinker's Construct, I found out that the smeltery was kinda big and bulky to run. As such, I introduce to you, the Micro Smeltery. This is a single block with the ability to melt any item that the smeltery can, faster, and using RF power. As such, it is capable of being pretty useful in your automation endeavors.

The newest feature. Don't you want to transport your power along a long distance, but don't feel like using a Tesseract? Introducing, the invisible lasers of longdistanceness! These lasers can travel a long way, up to 400 blocks in any direction in fact! They'll only go where there is air blocks however.

Now featuring, Visibility! If you have Computronics installed, the lasers are VISIBLE, whoa, you can't even get this anywhere else.

There are 2 types of lasers:
Energy Laser Emitter - Send RF power into any side of the block, and it'll emit a laser out the other side!
Energy Laser Emitter (Energisable) - Allows energy in the laser to be energised once every 100 pulses. (5 seconds)
Laser Energiser (Solids) - Energises energisable lasers that pass through it. Requires items to be piped into it.
Human Laser Emitter - Requires RF Power. Right click on any side of the block, it emits a laser out the other side and teleports you all the way to the receptor on the other end! Sends a ping every 5 seconds out every direction, this can be turned off by shift-right clicking.
Mirror (Laser) - Right click to set the two sides that it'll reflect lasers. It reflects at a right angle.
Double Mirror (Laser) - Right click to set the input side, and rotate what two output sides there are.
Laser Receptor - When it receives any lasers, it will output the things that were transferred out the opposite side.