Synaxis:Control Engineering

Synaxis: Control Engineering

An addon for Synaxis (formerly ControlCraft) that introduces digital control through Cimulink circuits, alongside high-precision control components. Rethink traditional redstone control and explore new ways to operate your vehicles—from cockpit controls and precise thrust adjustment to catapult launches.

Fixed Controllers: Build Your Cockpit

Built on Create: Tweaked Controllers, these fixed controllers bring together control inputs, cockpit instruments, and signal outputs:

• Three signal output options: Create wireless redstone, Synaxis controller wires, and Cimulink circuits.
• Attitude indicator and HUD: Bring useful instruments and information into your cockpit.
• Relative axes: Accumulate inputs into a persistent control value, ideal for vehicle throttles and other accumulator-based controls.
• Control Chair and joystick linkage: Integrate with the Synaxis Control Chair’s joystick controls.
• TWS radar integration: Connect with Create: Fire Control’s TWS radar for a more complete cockpit experience.

Thrust Core: Precision with a View

High-precision thrust control meets realistic-looking exhaust plumes and engine nozzles, bringing both control and visual detail to your propulsion system. This might just be one of the best propulsion options for aircraft built with Sable.

Those visuals come at a cost, though: low-end PCs, proceed with caution!

Catapult: Aircraft Carrier Optional

Designed around Gearwork landing gear, the catapult captures and holds a landing gear wheel, then launches the attached vehicle at high speed.

Your vehicle does not have to be a carrier aircraft, and the catapult does not have to sit on an aircraft carrier. With the appropriate Gearwork landing gear, other vehicles can enjoy a catapult launch too.

DR Converter: More Compact Circuit Interfaces

The DR Converter, also known as the Digital-to-Redstone Converter, bridges Cimulink circuits and external redstone systems. It consolidates signal conversion to reduce the number of ports needed for external communication, keeping circuit layouts compact and connections easier to manage.

Survival Gameplay

The addon also adds survival crafting content for Synaxis, bringing control devices and circuits into your survival progression. Similar content is already present in Synaxis’s latest internal build, but I’ve chosen to keep this part of the addon.

Acknowledgements

Special thanks to the author of Synaxis for providing the powerful, comprehensive API that made so many of these ideas possible.

Synaxis: Control Engineering｜Synaxis：控制工程

这是一个基于 Synaxis（原 ControlCraft） 的附属模组，围绕 Cimulink 电路引入数字化控制方式与高精度控制元件，颠覆传统红石控制，拓展载具控制玩法。从驾驶舱操控、精细推力调节到弹射起步，为你的载具带来更多可能。

固定控制器：打造你的驾驶舱

基于 Create: Tweaked Controllers 的固定控制器，将操控输入、仪表显示与信号输出整合在一起，支持：

• 三种信号输出：Create 无线红石、Synaxis 线控和 Cimulink 电路。
• 姿态仪与 HUD：为驾驶舱提供直观的仪表与信息显示。
• 相对轴：将输入累加为持续变化的控制值，适用于载具油门或其他累加器用途。
• 控制椅与摇杆联动：支持 Synaxis 控制椅的摇杆联动。
• TWS 雷达联动：支持先进火控模组的 TWS 雷达联动，进一步完善驾驶舱体验。

推力核心：精确控制，也要足够好看

提供高精度推力控制，搭配相对写实的尾焰与尾喷管，让动力系统兼顾操控与观感。它也许是 Sable 环境下最好的航空载具动力源之一。

当然，这些视觉效果也有代价：渣机慎入！

弹射器：谁说一定要在航母上？

基于 Gearwork 起落架设计，能够捕获并固定起落架轮胎，再将载具高速弹出。

不必是舰载机，也不必装在航母上。只要你的载具配有相应的 Gearwork 起落架，就可以尝试弹射起步。

DR 转换器：让电路接口更紧凑

DR 转换器，又名数字—红石转换器，专为 Cimulink 电路与外部红石系统之间的通讯设计。通过集中处理信号转换，缩小对外通讯所需的端口规模，让电路布局更紧凑、连接更清晰。

生存玩法

模组还为 Synaxis 补充了生存相关的合成与制作玩法，让控制设备和电路也能融入生存流程。虽然 Synaxis 的最新内部版已经有了相关内容，我还是选择保留这部分玩法。

致谢

特别感谢 Synaxis 的作者提供强大而完善的 API，让许多关于载具控制的想法得以实现。

Project Overview Fixed Tweaked Controller is an addon for Create: Tweaked Controllers that turns the lectern-mounted remote controller into a standalone, placeable and mineable block. It supports three signal transmission systems: Create wireless redstone channels: Preserves and uses the controller’s original frequency configuration. Drive-By-Wire With Sable cables: Outputs joystick axes, triggers, buttons, and control status through wire channels. Synaxis control networks: Registers as a Tweakerminal plant port and can be recognized by device port proxies, Buses, Circuits, and Luacuits. The controller provides Synaxis outputs including lx, ly, rx, ry, lt, rt, linked, and b0--b14, as well as matching cable channels for external control systems. Usage Right-click the fixed controller with an empty hand to start controlling it. Sneak-right-click it with an empty hand to open the configuration screen and set wireless redstone channels. To use the seat-based control mode, place a Create seat directly adjacent to the controller on its local -Z side. Sit on the seat and bind Use / Exit Fixed Controller in the Controls menu to enter or exit control mode. You can exit using the new toggle key, the original Create: Tweaked Controllers exit key, or Esc. Additionally, synchronization with Synaxis Control Chairs has been added. 项目简介 固定式讲台遥控器是 Create: Tweaked Controllers 的附属模组，将讲台上的遥控器独立制作成一个可放置、可挖掘的方块。 它支持三种信号输出方式： Create 无线红石频道：保留原遥控器的频率配置。 Drive-By-Wire With Sable 线缆：输出摇杆、扳机、按钮和操控状态。 Synaxis 控制学：作为 Tweakerminal 设备端口接入 Bus、Circuit、Luacuit 和设备端口代理。 固定式遥控器提供 lx、ly、rx、ry、lt、rt、linked 以及 b0--b14 等控制学输出，也支持对应的线缆频道。 使用方法 空手右键方块，开始操控遥控器。 空手潜行右键方块，打开配置界面设置无线红石频道。 使用 Create 坐垫时，将坐垫放在讲台朝向反方向、紧贴方块的 -Z 位置。玩家坐上坐垫后，可在控制设置中绑定 Use / Exit Fixed Controller 按键进行进入和退出。 退出操控可使用新增按键、Create: Tweaked Controllers 原有退出键或 Esc。 此外添加了对synaxis控制椅的联动效果